komotodraggin.com
How to use the Swingarm Locknut Tool - Step 18
Suzuki GSX-R750

Step 18 Remove the spacer and feel the movement of bearing rollers with your fingers. The rollers should move without any stiction. Replace bearing if you feel any stiction or hesitation. Clean the dust cover, spacer and bearing surface with a rag to remove old grease. Inspect the spacer for damage; replace if necessary. Apply a high-quality bearing grease liberally to the bearing and spacer. Reinstall the spacer and dust cover.

Last

Back to How-To Page 3

Next



| Home | About Us | Products | Picture Gallery | Contact |