komotodraggin.com
How to use the Swingarm Locknut Tool - Step 21
Suzuki GSX-R750

Step 21 Turn the swingarm upside down and remove the spacer from the cushion rod mount. Feel the movement of rollers of bearings on either side of the mount with your fingers. The rollers should move without any stiction. Replace bearing(s) if you feel any stiction or hesitation. Clean the spacer and bearing surfaces with a rag to remove old grease. Inspect the spacer for damage; replace if necessary. Apply a high-quality bearing grease liberally to the bearings and spacer. Reinstall the spacer.

Last

Back to How-To Page 3

Next



| Home | About Us | Products | Picture Gallery | Contact |